Carbon Monoxide Detector AS 3786 and AS 7240 Test Report

Detailed Explanation of the Test Report Standards for Fire Smoke and Carbon Monoxide Detectors on Amazon Australia.

Fire smoke and carbon monoxide detectors are crucial devices for ensuring safety in both residential and commercial settings. To sell these products in global markets, manufacturers and sellers must ensure their products comply with local regulations and standards. This article introduces the compliance requirements on the Amazon platform and similar standards in Europe and the United States.

Fire Smoke and Carbon Monoxide Detectors Covered by This Policy

Smoke Alarm

A smoke alarm emits a sound or visual alert in a specific area to warn of the presence of smoke, indicating a potential fire hazard. These products are typically used in homes.

Smoke Detector

A smoke detector is part of a larger fire safety system and can send signals to a fire alarm control panel to alert of smoke in a particular area, indicating a potential fire hazard. These products are generally used in commercial environments.

Carbon Monoxide Alarm

A carbon monoxide alarm emits an audible alert when carbon monoxide levels reach dangerous levels. Carbon monoxide alarms are designed to detect the presence of carbon monoxide from sources such as internal combustion engines, fuel-burning appliances, and fireplaces.

Our Fire Smoke and Carbon Monoxide Detector Policy

Amazon requires all other fire smoke and carbon monoxide detectors to be tested and comply with the following regulations, standards, and requirements:

Standards for the Australian Market

Amazon's policy stipulates that sellable products must meet the following regulations, standards, and requirements:

- Product: Smoke Alarms

  - Regulation, Standard, and Requirement: AS 3786:2014 (Smoke alarms using scattered light, transmitted light, or ionization)

- Product: Carbon Monoxide Alarms

  - Regulation, Standard, and Requirement: AS 7240.6:2017 (Fire detection and alarm systems using electrochemical cells)

Your product detail page must include the following information:

- Model, part number, or product number

You must submit the following information:

- Documentation: Test reports issued by laboratories accredited by ISO17025, NATA (National Association of Testing Authorities), or CNAS (China National Accreditation Service for Conformity Assessment), proving that the product complies with the above regulations, standards, and requirements.

Standards for the European Market

Amazon requires all other fire smoke and carbon monoxide detectors to be tested and comply with the following regulations, standards, and requirements:

- Product: Smoke Alarms

  - Regulation, Standard, and Requirement: EN 14604 (Smoke alarm standard)

  - Additionally, if applicable:

    - lvd directive 2014/35/EU (low voltage directive), referencing EN 62368-1 (Plug-in devices)

    - CPR 305/2011 (Battery-powered devices)

    - RED 2014/53/EU ([Radio Equipment Directive] Wireless Bluetooth devices)

- Product: Carbon Monoxide Alarms

  - Regulation, Standard, and Requirement: EN 50291 (Carbon monoxide alarm standard)

  - Additionally, if applicable:

    - LVD Directive 2014/35/EU (Low Voltage Directive), referencing EN 62368-1 (Plug-in devices)

    - EMC 2014/30/EU ([Electromagnetic Compatibility Directive] Battery-powered devices)

    - RED 2014/53/EU ([Radio Equipment Directive] Wireless Bluetooth devices)

- Product: Combustible Gas Alarms

  - Regulation, Standard, and Requirement: EN 50194 (Combustible gas alarm standard)

  - Additionally, if applicable:

    - LVD Directive 2014/35/EU (Low Voltage Directive), referencing EN 62368-1 (Plug-in devices)

    - EMC 2014/30/EU ([Electromagnetic Compatibility Directive] Battery-powered devices)

    - RED 2014/53/EU ([Radio Equipment Directive] Wireless Bluetooth devices)

Standards for the US Market

Amazon requires all other fire smoke and carbon monoxide detectors to be tested and comply with the following regulations, standards, and requirements:

- Product: Smoke Alarms

  - Regulation, Standard, and Requirement: ul 217 (Smoke alarm standard)

- Product: Smoke Detectors

  - Regulation, Standard, and Requirement: UL 268 (Smoke detector standard for fire alarm signaling systems)

- Product: Carbon Monoxide Alarms

  - Regulation, Standard, and Requirement: UL 2034 (Single and multiple station carbon monoxide alarms standard)

- Product: Household Gas Detectors

  - Regulation, Standard, and Requirement: UL 1484 (Household gas detectors standard)

- Product: Heat Detectors

  - Regulation, Standard, and Requirement: ULC-539 (Single and multiple station heat alarm standard)

Steps to Submit a Test Report

1. Choose an appropriate laboratory: Ensure the laboratory is accredited by ISO17025, NATA, or CNAS.

2. Conduct product testing: Send the product to the accredited laboratory for testing.

3. Obtain the test report: Ensure the report indicates that the product meets the relevant standards.

4. Submit the test report: Log in to your Amazon seller account and upload the report.

China JJR Laboratory is an IEC 17025 accredited laboratory that provides relevant testing services. Located in China, we can help you save 30% on certification testing costs. Welcome to request a quote.