EMC China Lab

Lighting Compliance and Safety Testing Services

Views :
Update time : 2025-03-26

In the safety standards for lighting products, there are two major standard systems:

IEC and ANSI/UL&CSA.

 

IEC Standard System

The IEC standard, set by the International Electrotechnical Commission, is adopted by most countries, including Europe, Australia, and the Asia-Pacific region. These standards are also converted or equivalently adopted as national or regional standards such as EN, AS/NZS, GB, etc.

 

Lighting Compliance and Safety Testing Services(图1)


Key IEC Standards:

- iec 60598 (Lighting Fixtures)

- Part 1: General requirements for lighting fixtures.

- Part 2: Supplementary requirements for over 20 types of lighting fixtures (e.g., fixed, portable, string lights, emergency lights, etc.)

 

- EN 61347 (Ballasts, Transformers, Drivers, and Other Lighting Control Devices)

- Part 1: General safety requirements for lighting control devices.

- Part 2: Supplementary requirements for specific devices (e.g., tungsten lamps, fluorescent lamps, discharge lamps, neon lights, and electronic or inductive ballasts).

 

- EN 60968 (Energy-efficient Lamps)

 

- IEC 62031 (LED Modules)

 

- IEC 62560 (LED Light Sources)

 

ANSI/UL & CSA North American Standard System

The ANSI/UL & CSA standard system differs significantly from the IEC system. UL & CSA standards are product-specific, leading to numerous product standards, including:

 

- UL1598

- UL153

- UL1573

- UL1574

- UL962

- UL1786

- UL924

- UL1993

- UL588

- UL935

- UL1029

- UL1012

- UL2161

and corresponding CSA specifications.

 

For LED products, the UL 8750 standard is used, in conjunction with various application-specific product standards.

 

IP Code Testing

For lighting products used in areas such as bathrooms, gardens, and outdoor environments, IP code testing is required. The IP rating indicates the dustproof and waterproof levels of electrical equipment. The specific meanings of the two-digit code in the IP rating can be found in IEC/EN 60529.

 

Other Testing Services

In addition to the standards above, China JJR Laboratory also offers tests for:

- IK Mechanical Protection Levels for enclosures

- Other safety-related tests

 

Feel free to contact us for more detailed information on our testing services.


Email:hello@jjrlab.com


Leave Your Message


Write your message here and send it to us


Related News
Read More >>
What is FCC SDoC Certification Compliance What is FCC SDoC Certification Compliance
04 .06.2026
FCC SDoC replaces VoC & DoC under FCC Part 15B, needing a U.S. responsible party for non-wireles...
What Are RoHS, UN 38.3 and MSDS, and How Do They D What Are RoHS, UN 38.3 and MSDS, and How Do They D
04 .06.2026
RoHS, UN 38.3 and MSDS are essential product compliance standards, and JJR Lab provides professional...
Lithium Battery UN38.3 Vibration Test Service Lithium Battery UN38.3 Vibration Test Service
04 .06.2026
JJR Lab offers UN38.3 vibration test for lithium batteries, ensuring safe & compliant air transp...
CE Certification for Game Consoles Exported to the CE Certification for Game Consoles Exported to the
04 .07.2026
CE certification is mandatory for EU-bound game consoles per LVD, EMC, RED, RoHS and REACH. JJR Lab ...
GB/T 4943.1-2022 SELV Testing Requirements GB/T 4943.1-2022 SELV Testing Requirements
04 .05.2026
JJR tests voltage, isolation & fault conditions to ensure SELV compliance, correcting the miscon...
EU WEEE Directive 2012/19/EU EU WEEE Directive 2012/19/EU
04 .04.2026
EU WEEE Directive 2012/19/EU mandates e-waste recycling and full producer responsibility; JJR LAB of...
What is GB 4806 Certification Compliance What is GB 4806 Certification Compliance
04 .04.2026
GB 4806 sets safety rules for food contact materials, requiring migration and toxicity tests to prev...
What is Japan S-JET Certification? What is Japan S-JET Certification?
04 .04.2026
S-JET is a voluntary Japanese safety certification for high-risk electrical products, boosting trust...

Leave Your Message