EMC China Lab

Amazon Japan & Australia Battery-Powered Products Compliance

Views :
Update time : 2026-11-16

Attention, sellers on the Amazon Japan and Australia marketplaces!

Amazon has recently updated the compliance requirements for 5 categories of battery-powered products on its Japan and Australia sites. All these categories are now strictly subject to the rule: "Approved before selling."


This means: As long as your test reports are not in place, your Listing can be taken down at any time, instantly turning your inventory into "dead stock." Non-compliant products on the Japan marketplace will be subject to mandatory removal by category starting from December 30, 2026, leaving you with just over a month. The new policy for portable power supplies on the Australia marketplace officially took effect on November 9, 2026.

Amazon Japan & Australia Battery-Powered Products Compliance(图1)

The time left for you to prepare these reports is running out.

(Note: Amazon Seller Central "Policy Compliance" Page — An Account Health Rating at risk will trigger a removal warning)


Which 5 Product Categories Are Affected?

Marketplace

Category

Removal Date

Japan

Lithium battery-powered home appliances

2026.12.30

Japan

Electric mobility devices (e-motorcycles, e-scooters, hoverboards, etc.)

2027.01.06

Japan

Electric mobility device batteries

2027.01.06

Japan

Lithium batteries and portable power supplies

2027.01.08

Australia

Portable power supplies (power banks, outdoor power stations, etc.)

2027.01.08

Note: The exact time is subject to the actual compliance deadline shown in your seller account. It is highly recommended to log into your "Account Health" page to verify immediately.


What Tests Are Required for Each Category?

Japan Marketplace · Lithium Battery-Powered Home Appliances

Applicable Products: Vacuum cleaners, robot vacuums, floor washers, air purifiers, fans, humidifiers, air conditioners, dehumidifiers, hair dryers, curling irons, juicers, meat grinders, food vacuum sealers, and other home devices powered by lithium batteries (Lithium-ion / Lithium-polymer / LiFePO4).Core Standards:

Complete Machine Safety: JIS C 9335-1 / iec 60335-1 + corresponding specific requirements (60335-2-2 for vacuum cleaners, 2-14 for kitchen appliances, 2-65 for air purifiers, 2-80 for fans, 2-23 for hair care appliances, etc.)

Home Appliance Lithium Batteries: JIS C 62133-2 / iec 62133-2 + UN 38.3 Transport Test + BTS (Battery Test Summary)


Japan Marketplace · Electric Mobility Devices

Applicable Products: Electric bicycles, electric tricycles, electric kick scooters, electric skateboards, hoverboards, self-balancing scooters, electric unicycles, etc. (Not applicable to children's products).Core Requirements:

1.Japan Electrical Appliance and Material Safety Act (PSE) Certificate of Conformity

2.Japan Radio Act Certificate of Conformity

3.For kick scooters, self-balancing scooters, electric skateboards, etc.: ANSI/CAN/UL 2272 test report

4.For pedal-assist bicycles: Japan Traffic Management Technology Association (JTMTA) Model Certification


Japan Marketplace · Electric Mobility Device Batteries

Applicable Products: Rechargeable lithium batteries for powering electric mobility devices, including batteries sold with the device, sold separately, or as modification kits.Core Standards (Choose One):

UL 2271 (Batteries for Light Electric Vehicles), or

JIS C 62133-2 / IEC 62133-2 + JIS C 62368-1 / iec 62368-1Additional Requirements: UN 38.3 test report + BTS


Japan Marketplace · Lithium Batteries and Portable Power Supplies

Applicable Products: Rechargeable lithium batteries/battery packs, power banks, portable outdoor power stations, portable car jump starters, etc.Core Standards:

Lithium Batteries: JIS C 62133-2 / IEC 62133-2 or JIS C 8715-2 / IEC 62619

Power Banks / Outdoor Power Stations / Jump Starters: IEC 62133-2 + IEC 62368-1 Additional Requirements: UN 38.3 + BTS


Australia Marketplace · Portable Power Supplies

Applicable Products: Power banks, portable outdoor power stations (energy storage power supplies), and other power supply devices with built-in lithium/lithium-polymer batteries.Core Standards:

1.AS/NZS 62368.1:2022

2.BS/EN/iec 62133-2:2017+AMD1:2021 or ul 2054

3.UN 38.3 test report + BTS

4.The Australia site also requires reports to be issued by an ISO 17025, NATA, or ILAC MRA accredited laboratory, and the verification must be completed in cooperation with a third-party Testing, Inspection, and Certification (TIC) service provider authorized by Amazon.


Top 3 Pitfalls for Sellers

Pitfall 1: Incorrect Laboratory Qualifications Amazon explicitly requires reports to come from ISO 17025 accredited laboratories. If the lab lacks CNAS/ILAC mutual recognition qualifications, submitting the report will simply be a waste of money and time.

Pitfall 2: Missing UN 38.3 and BTS For battery-related products, in addition to the safety report, the UN 38.3 Transport Test Report and BTS (Battery Test Summary) are absolutely indispensable. Many sellers only do the battery safety test and realize they are missing documents only after being rejected upon submission.

Pitfall 3: Wrong Submission Path For the Japan marketplace, home appliances, electric mobility devices, and their batteries are submitted directly to Amazon. However, lithium batteries and portable power supplies for the Japan site, as well as portable power supplies for the Australia site, must be verified in cooperation with a third-party testing and certification service provider authorized by Amazon. If you choose the wrong path, your review will be delayed indefinitely.


With Time So Tight, What Should You Do?

JJR LAB is a CNAS-accredited laboratory that strictly complies with ISO/IEC 17025:2017 requirements. CNAS is an international mutual recognition member of ILAC/APAC, meaning the test reports we issue hold multilateral international recognition—fully meeting Amazon Japan and Australia's requirements for laboratory qualifications.


1.Comprehensive testing capabilities for the new policy standards:

Batteries: IEC/JIS 62133-2, IEC 62619, UL 2271, UL 2272, UL 2054, ul 2056, UN 38.3. (Large battery testing capabilities: Max voltage 2250V / Current 800A / Power 400KW)

Complete Machine Safety: IEC 60335 series for home appliances, IEC/AS-NZS 62368.1.

Japan Market: Thoroughly familiar with the compliance paths for Japan's Electrical Appliance and Material Safety Act (PSE) and Radio Act.



2.TÜV Rheinland Authorized Laboratory: Testing + Certification in One Step: JJR has obtained on-site testing authorization from TÜV Rheinland. The authorization scope accurately covers the core standards of this new policy—IEC/EN 62133-1, IEC/EN 62133-2, JIS C 62133-2 (Battery Safety), and IEC/EN 62368-1 (Audio/Video & IT Equipment Safety). Once samples finish testing at the JJR lab, TÜV Rheinland will review and directly issue the report certificate. If your products require battery reports issued by NRTL (USA) or SCC (Canada) qualified labs as requested by Amazon, we can similarly conduct the testing while Rheinland issues the certificate, saving you from cross-border shipping, and drastically reducing both cycle time and cost.


3.Amazon-Recognized TIC Service Provider: JJR is directly recognized by Amazon as a TIC (Testing, Inspection, and Certification) service provider (TIC agency for the toy category) and is intimately familiar with the processes, document specifications, and submission standards of amazon tic reviews. For the TIC verification steps required by the Japan and Australia battery product policies, we can follow up the entire process from issuing the report to docking with the review, helping sellers clear any bottlenecks and successfully pass the review.


Our Service Process

1.Provide Product Model / ASIN: Our engineers will help you evaluate whether your product falls within the policy scope and identify exactly which reports are needed.

2.Develop a Plan: We will formulate a testing plan and provide a quotation based on the corresponding standards for the Japan or Australia marketplace.

3.Test and Issue Reports: Send in your samples for testing. We will issue the required ISO 17025 qualified test report + UN 38.3 + BTS.

4.Review Docking: We will guide you to submit compliance documents through Amazon's required pathways. For categories that involve TIC verification, we will handle the full docking of the subsequent review stages and follow up until the review is approved and your Listing is restored to a sellable state.



Email:hello@jjrlab.com


Leave Your Message


Write your message here and send it to us


Related News
Read More >>
Amazon Japan & Australia Battery-Powered Produ Amazon Japan & Australia Battery-Powered Produ
11 .16.2026
Ensure Amazon Japan/Australia compliance for battery-powered products. JJR LAB (CMA/CNAS/ISO/IEC 170...
What is Textile 16 CFR 303 Certification Complianc What is Textile 16 CFR 303 Certification Complianc
11 .13.2026
Ensure US apparel market entry with Textile 16 CFR 303 compliance. JJR Lab offers ISO/IEC 17025, CMA...
Amazon Approved Toy Testing Labs Amazon Approved Toy Testing Labs
11 .13.2026
JJR LAB, an Amazon approved toy testing lab with ISO/IEC 17025, CMA, and CNAS. We provide CPSC toy s...
China RoHS 2026-2027 Compliance China RoHS 2026-2027 Compliance
11 .13.2026
Ensure your China RoHS 2026-2027 compliance with JJR Laboratory. As an ISO/IEC 17025 accredited test...
What is the Swiss FCM Regulation? What is the Swiss FCM Regulation?
11 .13.2026
Navigate the 2026 Swiss FCM Regulation updates with JJR Laboratory. As an ISO/IEC 17025, CMA & C...
EU New Packaging Regulation PPWR Compliance EU New Packaging Regulation PPWR Compliance
11 .13.2026
Ensure 2027 EU PPWR compliance with JJR LAB. As an ISO/IEC 17025, CMA & CNAS accredited lab, we ...
CE, RoHS, REACH, PPWR Compliance Guide CE, RoHS, REACH, PPWR Compliance Guide
11 .13.2026
JJR Lab provides ISO/IEC 17025, CMA, and CNAS accredited testing for CE, RoHS, REACH, and PPWR compl...
Power Banks / Batteries Japan PSE Certification Power Banks / Batteries Japan PSE Certification
11 .13.2026
Get Japan PSE certification for power banks at JJR Lab. We are an ISO/IEC 17025 accredited testing l...

Leave Your Message