ASTM F1169 Standard Size Baby Crib

Test Standard:astm f1169-2013

Test Item:Full Size Baby Cribs Safety Testing (Standard Size)

Test Information:

Clause: Tests for toy accessories in accordance with ASTM F963

Clause: Flammability test (16 CFR 1500.44)

5: Lead in Surface Coating (16 cfr 1303)

5.1: General Requirements

5.2: Wood parts

5.3: Lead In Paint or Surface Coating (16 CFR 1303)

5.4: Small parts

5.5: Corner post

5.6: Slat construction

5.7: Crib side configurations

5.8: Full-size baby cribs - Dimensions

5.9: Spacing of crib openings

5.10: Toe holds

5.11: Hardware and fasteners

5.12: Toys accessories (ASTM F963)

5.13: Recordkeeping

5.14: General Requirements review after testing (section 5)

5.15: Sharp points & edges before and after testing (16 CFR 1500.48 & 49)

5.16: Flammability test (16 CFR 1500.3(c)(6)(vii))

5.17: Opening

5.18: Scissoring, Shearing, or Pinching

5.19: Labeling

5.20: Cord/Strap Length

6: Cribs that fold for storage or transport

Performance Requirements

6.1: Plastic teething rail test requirements

6.2: Cycle test

6.3: Crib Side Latch Test Requirements

6.4: Mattress support system vertical impact test requirement

6.5: Mattress support system test requirement

6.6: Crib side test requirements

6.7: Spindle/Slat strength testing

6.8: Cutouts

6.9: Entrapment in accessories

6.10: Mattress support system opening

8: Marking and labeling

9: Instructional literature

Lead Time:
Regular Service: 10 working days.

Sample Volume:
2 sets of full samples, including installation instructions (if applicable). For toxic elements/burning tests, an additional set of samples is required.

Testing Services Provided by China JJR Laboratory. Feel free to inquire.