EMC China Lab

Indonesia SDPPI Testing Report New Regulations

Views :
Update time : 2024-06-08

Indonesia's SDPPI recently introduced a new regulation [NOMOR 109 TAHUN 2024], replacing the previous regulation [NOMOR 11 TAHUN 2021]. The summary is as follows:

 

1. The number of SDPPI recognized laboratories has been reduced: HKT Device laboratories decreased from 39 to 37, and NON-HKT Device laboratories decreased from 126 to 105.

2. The address of the testing laboratory shown in the test report must match the address registered on the SDPPI website. If there is any different address, SDPPI will reject the application.

3. All test reports must have a digital signature.

4. Information about the testing laboratory's scope must be consistent with the SDPPI website. Additionally, updates to the following information about the testing laboratory need to be reported to SDPPI:

   - Testing laboratory name;

   - Testing laboratory address;

   - Testing laboratory contact information:

     a) Contact person's name and position

     b) Contact phone number

     c) Email address

 

These regulations are mandatory from April 1, 2024, to December 31, 2024.

 

Additionally, regarding Indonesia SDPPI type approval, please note the following:

 

1. According to announcement [Nomor: 457/DJSDPPI.5/SP.04.09/06/2021], a summary of test results must be provided in the format required by SDPPI.

2. According to regulation [NOMOR 3 TAHUN 2024], the provided test report must not be older than 5 years, meaning it is only valid within 5 years from the date of issuance. Additionally, from May 23, 2024, SRD devices must also be labeled with a warning mark. Previously, SRD products were excluded, but the new announcement states that all products need warning labels, with no exemptions mentioned.

3. According to regulation [NOMOR 177 TAHUN 2024], mobile phones and tablet devices, as telecommunication equipment used within 20 cm of the body and with radiation emission power exceeding 20 mW, will implement head SAR limits starting from April 1, 2024. From August 1, 2024, torso/body limb SAR limits will be mandatory. From the date of mandatory implementation, mobile phones and tablet devices applying for SDPPI type approval must provide sar test reports. sar testing must be conducted in local laboratories in Indonesia.


Email:hello@jjrlab.com


Leave Your Message


Write your message here and send it to us


Related News
Read More >>
INMETRO Certification for Power Cord Plug Products INMETRO Certification for Power Cord Plug Products
07 .15.2025
INMETRO certification is mandatory for power cord plugs entering Brazil. JJR Lab provides testing, p...
Brazil INMETRO Certification Requirements Brazil INMETRO Certification Requirements
07 .15.2025
INMETRO certification is key to entering Brazil’s market. JJR Lab provides testing to help your prod...
What is INMETRO Certification? What is INMETRO Certification?
07 .15.2025
INMETRO certification ensures products meet Brazil‘s safety and quality standards. JJR Laboratory pr...
Brazil INMETRO Certificate Consultation Brazil INMETRO Certificate Consultation
07 .15.2025
Brazil INMETRO Certificate ensures product compliance and market access. JJR Lab provides testing to...
What is the IC Mark in Canada? What is the IC Mark in Canada?
07 .15.2025
IC mark certifies EMI compliance for electronics in Canada. Wireless products need IC-ID. Testing by...
Canada IC (ISED) Certification for Electronic Prod Canada IC (ISED) Certification for Electronic Prod
07 .15.2025
IC (ISED) certification is vital for entering the Canadian market. JJR Lab offers fast, reliable tes...
IC Certification for Communication Equipment in Ca IC Certification for Communication Equipment in Ca
07 .15.2025
IC certification ensures wireless devices meet Canadian standards. JJR Laboratory provides testing f...
IC Canada Certification Logo IC Canada Certification Logo
07 .15.2025
ISED certification ensures wireless products meet Canadian standards for market entry. Testing and c...

Leave Your Message