EMC China Lab

Is FCC Certification accepted in Canada?

Views :
Update time : 2024-04-16

Does Canada Accept FCC Certification?

The United States has established standards for products that may cause electromagnetic interference to REDuce the level of radio frequency (RF) interference between electronic devices. Generally, every electronic product placed on the US market, regardless of whether it has wireless functionality, must comply with the regULations of the Federal Communications Commission (FCC) in order to be sold. Additionally, if a product is equipped with a certified radio module, the final product as a whole must also comply with FCC regulations. A few days ago, a client consulted whether FCC certification is required for exporting products to Canada. Today, I'll answer this question.

Is FCC Certification accepted in Canada?(图1)

Is fcc certification required for Exports to Canada?

Although ic certification is mandatory in Canada, FCC certification and canadian ic certification are mutually recognized, so only FCC certification is required. FCC certification is mandatory in the United States, and IC certification is also mandatory in Canada, both focusing on conducting related tests in electromagnetic compatibility (EMC) aspects, with different requirements for wired and wireless products, and varying levels of strictness in control.

 

The basis for approval in the Canadian market is the so-called ised certification. The responsible organization for Canadian radio licenses is called Innovation, Science, and EconoMIC Development Canada (ised). In most cases, the technical requirements for market approval of products with radio technology are the same as in the United States, and the tasks of FCB in Canada are similar to those of TCB.

Is FCC Certification accepted in Canada?(图2)

Documents have been submitted to ISED but have not been published on the website. If confidentiality is not required, these documents can be viewed after appropriate negotiation.

 

Compared to the United States, in addition to the certification number, the model name or the so-called "HVIN" must also be used on the label. Additionally, a marketing name is required for each approval before it is published on the website.

 

Approval cannot be obtained without a local representative (LR). LR must be registered with the authoritative body ISED.


Hello@jjrlab.com


Email:hello@jjrlab.com


Leave Your Message


Write your message here and send it to us


Related News
Read More >>
How to get the AS/NZS 4268:2017+A1:2021 Test Repor How to get the AS/NZS 4268:2017+A1:2021 Test Repor
12 .31.2025
Get the AS/NZS 4268:2017+A1:2021 Test Report from JJR Laboratory for RF compliance testing of short-...
KC Certification Process for South Korea KC Certification Process for South Korea
12 .31.2025
KC certification for Korea: follow KC60950-1, 60335-1, KC71 standards; JJR Laboratory provides testi...
USB Charger Australia AS/NZS CISPR 32 Testing USB Charger Australia AS/NZS CISPR 32 Testing
12 .31.2025
USB Charger Australia compliance: AS/NZS CISPR 32 EMC & RE testing plus AS/NZS 62368.1 safety. G...
How Much Does C-Tick Certification Cost for Electr How Much Does C-Tick Certification Cost for Electr
12 .31.2025
C-Tick cost varies; JJR Lab provides EMI/RF testing to AS/NZS CISPR 15/22/32/13; example RCM wired t...
What is AS/NZS CISPR 32 Compliance Certification? What is AS/NZS CISPR 32 Compliance Certification?
12 .31.2025
AS/NZS CISPR 32 defines EMC emission & immunity tests for multimedia devices. JJR Laboratory pro...
How to get the AS/NZS CISPR 32 Test Report? How to get the AS/NZS CISPR 32 Test Report?
12 .31.2025
Get AS/NZS CISPR 32 test report with JJR Laboratory: 2–3 weeks EMC & safety testing, meet RCM re...
SIRIM Certification for Battery Exports to Malaysi SIRIM Certification for Battery Exports to Malaysi
12 .30.2025
SIRIM Certification enables battery export to Malaysia under IEC/UN standards; JJR Lab provides test...
ANATEL Certification for Power Banks and Phone Bat ANATEL Certification for Power Banks and Phone Bat
12 .30.2025
ANATEL cert for power banks & phone batteries: tests per IEC 62133 & IEC 61960 standards. JJ...

Leave Your Message