EMC China Lab

RF Test Report for LTE Band 4G/5G NR Products in Thailand

Views :
Update time : 2025-12-30

The National Broadcasting and Telecommunications Commission (NBTC) of Thailand announced that starting from July 7, 2025, products supporting LTE band 4G (32, 75, 76) and 5G NR (n32, n75, n76) shall submit RF test reports to obtain the NBTC Class B certification.

 

RF Test Report for LTE Band 4G/5G NR Products in Thailand(图1)


Requirements

① For new applications, NBTC requires the submission of test reports corresponding to the aforementioned frequency bands.

② For applications that have been submitted but not yet certified, NBTC requires the additional submission of test reports corresponding to the aforementioned frequency bands.

③ For certificates issued previously, NBTC does not mandate any action.

 

Accepted Standards for New Frequency Band RF Test Reports

① 4G bands 32, 75, 76: ETSI TS 136101 or TS 36.521 - 1

② 5G NR bands n32, n75, n76: ETSI TS 138101 - 1 V18.9.0 or later versions

 

Core Changes and Differences

Item

Before Change

After Change

Frequency Bands Requiring Report Submission

LTE: B1, B3, B5, B8, B40, B41<br>5G NR: n1, n3, n5, n8, n28, n40, n41, n258

Newly added LTE: B32, B75, B76<br>Newly added 5G NR: n32, n75, n76<br>(Requirements for other original frequency bands remain unchanged)

Test Report Requirements

Submitted in accordance with original requirements

1. New applications: RF test reports covering the newly added frequency bands must be submitted.<br>2. Submitted but uncertified applications: RF test reports covering the newly added frequency bands need to be supplemented.<br>3. Issued certificates: No action required; certificates remain valid continuously.

Testing Standards

In accordance with original standards

4G (LTE) bands 32, 75, 76: ETSI TS 136 101 or TS 36.521-1<br>5G NR bands n32, n75, n76: ETSI TS 138 101-1, V18.9.0 or later versions

 

Recommendations for Enterprises

To ensure the smooth acquisition of nbtc certification for products, two recommendations are provided to relevant enterprises:

Product Planning Phase: Reserve Testing Time in Advance

If the enterprise's product design includes the newly added frequency bands mentioned this time, the enterprise may reserve sufficient time for compliance testing in the early R&D stage, so as to avoid certification cycle delays caused by the newly added tests and prevent impacts on the product launch schedule in the Thai market.

 

2. Certification Application Phase: Respond Precisely Based on Specific Situations

① For new application projects: Conduct a comprehensive check one by one before submitting the certification application to ensure that the test reports fully cover all the supported newly added frequency bands, thus avoiding rejection due to missing items.

② For submitted but uncertified projects: Proactively contact the certification body, arrange RF testing for the newly added frequency bands as soon as possible, and supplement the test reports in a timely manner to ensure the uninterrupted progress of the certification process.

 

Friendly Reminder

The newly added requirements for NBTC Class B certification in Thailand have been implemented since July 7, 2025. JJR LAB recommends that relevant enterprises make reasonable plans for the testing time of the newly added items, so as to prevent products within the scope of certification from experiencing cycle delays and unnecessary economic losses due to the lack of RF test reports.


Email:hello@jjrlab.com


Leave Your Message


Write your message here and send it to us


Related News
Read More >>
What is Cytotoxicity ISO 10993-5 What is Cytotoxicity ISO 10993-5
09 .29.2026
ISO 10993-5 cytotoxicity testing at JJR LAB uses cell culture hardware and analyzers to measure cell...
What is Hemocompatibility Testing ISO 10993? What is Hemocompatibility Testing ISO 10993?
09 .29.2026
ISO 10993-4 hemocompatibility testing uses blood-contact test systems, flow probes and analyzers to ...
What is ISO 10993-5 Tests for In Vitro Cytotoxicit What is ISO 10993-5 Tests for In Vitro Cytotoxicit
09 .29.2026
ISO 10993-5 cytotoxicity testing at JJR LAB uses L929 cells, MTT hardware and extraction methods to ...
Electronic Product IEC 62368-1 Safety Testing Electronic Product IEC 62368-1 Safety Testing
09 .28.2026
JJR Lab provides IEC 62368-1 safety testing for AV and ICT products, covering HBSE, electric shock, ...
What is an EU SDS (Safety Data Sheet)? What is an EU SDS (Safety Data Sheet)?
09 .25.2026
JJR Lab explains EU SDS requirements under REACH, CLP and EU 2020/878, including 16-section Safety D...
What is the CA Prop 65 Warning Label? What is the CA Prop 65 Warning Label?
09 .24.2026
JJR Lab explains CA Prop 65 warning labels and compliance testing for lead, cadmium, phthalates and ...
2026 Amazon TIC Mandatory Audit Catalog 2026 Amazon TIC Mandatory Audit Catalog
09 .24.2026
2026 Amazon TIC Mandatory Audit Catalog by JJR Lab covers UN38.3, UL 4200A, ASTM F963, FCC Part 15C,...
Australian Electrical EESS and RCM Compliance Australian Electrical EESS and RCM Compliance
09 .24.2026
Australian EESS and RCM compliance with AS/NZS 4417, AS/NZS 3199 and IEC 60974-1 testing. JJR Testin...

Leave Your Message