EMC China Lab

Electronic & Electrical Safety Compliance Testing Services

Views :
Update time : 2025-12-26

We are dedicated to helping clients eliminate potential safety hazards in products during the design phase. We conduct compliance testing for potential risks such as Electric Shock, Energy Hazard, Mechanical and Heat Hazard, and Fire, thereby avoiding more severe losses.

Electronic & Electrical Safety Compliance Testing Services(图1)


Business Scope

Our services mainly cover the following product categories:

① Information technology equipment

② Audio and video equipment

③ Lighting fixtures

④ Power supply units

⑤ Household appliances

⑥ Batteries

⑦ Power tools

⑧ Motors & controllers

⑨ Photovoltaic (PV) products

⑩ Charging piles

⑪ Medical devices

Service Offerings

1. Assist clients in eliminating safety hazards during product design, including electrical clearance, creepage distance, safety isolation, etc. Evaluate structural design to avoid huge losses caused by mold modification.

2. Conduct Electrical Testing and structural evaluation at the initial stage of product certification, and issue audit reports.

3. Act as a liaison between clients and certification bodies, and handle documentation for certification applications on behalf of clients, saving application time and reducing client hassle.

4. Assist clients in addressing issues arising during factory inspections and provide guidance on factory inspection-related matters.

5. Provide safety personnel training for manufacturers.

6. Offer consultation on safety regulations and standards across different countries.

7. Laboratory rental services.

Testing Standards

Tested Products

Testing Standards

Information Technology Equipment

IEC/EN/UL 60950-1, CAN/CSA-C22.2 NO. 60950, AS/NZS 60950.1, J 60950, K 60950, GB 4943.1, IEC/EN/ul 62368-1/-3, AS/NZS 62368.1

Audio & Video Equipment

IEC/EN/UL 60065, AS/NZS 60065, CAN/CSA-C22.2 NO. 60065, J 60065, K 60065, GB 8898, IEC/EN/UL 62368-1/-3, AS/NZS 62368.1

Power Supply Units

IEC/EN/UL 60950-1, GB 4943.1, IEC/EN/UL 60065, GB 8898, IEC/EN/UL 62368-1, AS/NZS 62368.1, IEC/EN/ES 60601-1, GB 9706.1, IEC/EN 60335-2-29, GB 4706.18, IEC/EN 61558-1/-2, GB/T 19212.1/6/17, ul 1310, UL 1012, UL 2089, UL 697

Uninterruptible Power Supply (UPS)

IEC/EN 62040-1, AS 62040.1.1, UL 1778, GB/T 7260.1, IEC/EN 62040-3, GB/T 7260.3, YD/T 1095

Medical Devices

IEC/EN/ES 60601-1/-2, AS/NZS 3200.1/.2, GB 9706.1, GB 9706.15, GB 10793, GB 9706.25, IEC/EN 60601-2-25, AS/NZS 3200.2.25, IEC/EN 60601-2-27, AS/NZS iec 60601.2.27, IEC/EN 80601-2-35, AS/NZS 3200.2.35, IEC/EN 60601-1-11, AS IEC 60601.1.11, IEC/EN 60601-1-12, AS IEC 60601.1.12, IEC/EN 60601-2-10, AS 60601.2.10, IEC/EN 60601-2-57, AS IEC 60601.2.57, IEC/EN 60601-2-49, IEC/EN 610102-101, YY 0648, IEC/EN 61010-2-081, GB 4793.9, IEC/EN 61010-1, AS 61010.1, GB 4793.1

Instrumentation & Equipment

IEC/EN 61010-1, IEC/EN 61010-031, AS 61010.1, AS 61010.031, GB 4793.1, GB 4793.5

Transformers

IEC/EN 61558-1/-2, AS/NZS 61558.1/.2, GB/T 19212.1/3/5/6/7/9/13/16/17, UL 5085-1/2/3, UL 1411

Batteries

UL 1642, ul 2054, ul 2056, IEC/EN 62133, GB 18287, GB 31241, UN 38.3, MH/T 1020, Electrical Appliance and Material Safety Law, Article 8, Paragraph 1, Attached Table 9

Plugs

EN 50075, AS/NZS 3112, BS 1363

Electrical Automatic Controllers

IEC/EN 60730-1/-2, GB 14536.1/.2

Lighting Fixtures

IEC/EN 60598-1/-2, AS/NZS 60598.1/.2, JIS C 6598.1/.2, K 60598.1/.2, GB 7000.1/.2, EN 62031, IEC/EN 62384, GB/T 24825, UL 1993, ul 1598, UL 153, UL 1786, UL 73, UL 1029, EN 60081, EN 60901, EN 62035, EN 60188, EN 60662, IEC/EN 61167, EN 50294, EN 12464-1, GB/T 17263, IEC/EN 60969, GB/T 24908, IEC/EN 62612, GB/T 17263, GB/T 24823, IEC 62717, IEC/EN 62722-1/2, IEC/EN 62471, GB/T 20145, EN 62493, IEC/EN 60570, GB 13961, CIE 043, GB/T 7002, CIE 121, GB/T 9468

Lamp Control Gear

IEC/EN 61347-1/-2, AS/NZS 61347.1/.2, UL 8750, UL 935

Laser Products

IEC/EN 60825-1, AS/NZS 60825.1

Photobiological Safety

IEC/EN 62471-1

Household Appliances

IEC/EN 60335-1/-2, AS/NZS 60335.1/.2, GB 4706.1/.2, EN 62233, UL 982, UL 1026, UL 1082, UL 1083, UL 1431, UL 507, ul 1647, UL 141, UL 60335-2-3, UL 499, UL 197, UL 763, UL 430, UL 1236

TV Mounts

UL 1678, UL 2442

Portable Power Tools

UL 60745-N, IEC/EN 60745-1/2, AS/NZS 60745.1/.2

Industrial Control Products, Relays

UL 508

Water Pumps

UL 778

Electric Motors

IEC/EN 60034-1, GB 12350, GB/T 5171.1, UL 1004-1/2/3

Sealing, Packaging & Marking Equipment

UL 963

Insulation Systems

UL 1446

On-board Equipment

UL 2089, UL 458

Marine Electronic Equipment

Gd 22, IEC/EN 60945

Toys

IEC/EN 62115, GB 19865, EN 71

Environmental & Reliability Testing

IEC 60068-1/-2

Horizontal & Vertical Burning Tests

IEC/EN 60695-11-10, GB/T 5169.16, IEC/EN 60695-11-20, GB/T 5169.17, UL 94, GB/T 2408

Glow Wire Tests

IEC/EN 60695-2-10, GB/T 5169.10, IEC/EN 60695-2-11, GB/T 5169.11, IEC/EN 60695-2-12, GB/T 5169.12, IEC/EN 60695-2-13, GB/T 5169.13

Needle Flame Tests

IEC/EN 60695-11-5, GB/T 5169.5

Rail Transit Electronic Equipment

EN 50155, IEC 60571, GB/T 25119

Ball Pressure Tests

IEC/EN 60695-10-2, GB/T 5169.21

Softening Tests

IEC/EN 60695-10-2, GB/T 5169.21

Tracking Resistance Tests

IEC/EN 60112, GB/T 4207

Environmental Tests

IEC/EN 60068-2-1, IEC/EN 60068-2-2, IEC/EN 60068-2-30, IEC/EN 60068-2-78, GB/T 2423.1, GB/T 2423.2, GB/T 2423.3, GB/T 2423.4

Energy Efficiency Testing

IEC/EN 62301, AS/NZS IEC 62301, SANS 62301, EN 50564, EN 50563, IEC/EN 62087, IEC/EN 62087-1/-6, AS/NZS 62087.1, SANS 62087, GB 25957, (EC) No 1275/2008, (EC) No 642/2009, (EU) No 1062/2010, (EC) No 107/2009, (EU) No 801/2013, (EC) No 278/2009, (EU) 2019/2021, (EU) 2019/2013, 2105:2013, 2106:2013, AS/NZS 62087.2.1/.2.2, AS/NZS 4665.1/.2, GB 20943, AS/NZS 5815.1/.2, AS/NZS 5814.1, AS/NZS 5813.1, SANS 941, GB 24850, GB 12021.7, GB 21520, GB 28380, CQC 3114, GB 25956, GB 21521, CQC 3134, CSA-C381.1, CSA-C62301, COC V5, 10 CFR Parts 429 and 430, GB 19044, GB 19043, GB 19415, (EU) 2019/2020, (EU) 2019/2015, 347/2010/EU, EN 50285, IEC/EN 60969, CIE 18.2, CIE 13.3, CIE 15, CIE 84, CIE 97, EN 60357, LM-80, LM-82

Energy Star

Chargers (BCS), Audio & Video Equipment, Set-top Boxes, Computers, Uninterruptible Power Supplies, Televisions (TV), Displays, Telephones, Single-voltage External AC-DC and AC-AC Power Supplies, LM-66, LM-65, LM-79, LM-58, LM-82

Safety Requirements for Grid-connected PV Inverters

IEC/EN 62109-1, IEC/EN 62109-2, CNCA/CTS 0006, AS/NZS 3100, UL 1741, CAN/CSA C22.2 No. 107.1-01

Efficiency of Grid-connected PV Inverters

EN 50530, CGC/GF 035, IEC/EN 61683

Grid Connection Technical Requirements for Grid-connected PV Inverters

NB/T 32004, GB/T 37408, GB/T 37409, GB/T 19939, GB/T 19964, IEEE 1547, IEC/EN 61727, AS 4777.2, AS 4777.3, VDE-AR-N-4105, VDE V 0124-100, VDE 0126-1-1

Anti-islanding Tests for Grid-connected PV Inverters

IEC 62116

Acceptance of Grid-connected PV Power Generation System Projects

CGC/GF 003.1

Household Solar PV Power Systems

GB/T 19064

PV Combiner Equipment

CGC/GF 037, GB/T 34933, GB/T 34936

Power Electronic Converter Systems and Equipment

IEC/EN 62477-1

DC Charging Piles for Electric Vehicles

NB/T 33001, NB/T 33008.1, GB/T 18487.1, IEC/EN 61851-23, IEC/EN 61851-1, Q/GDW 1591, Q/CSG 1211013, Q/GDW 1233, GB/T 18487.2, GB/T 18487.3

AC Charging Piles for Electric Vehicles

NB/T 33002, NB/T 33008.2, IEC/EN 61851-1, GB/T 18487.2

Interoperability Testing for Electric Vehicles

GB/T 34657.1

Protocol Conformance for Electric Vehicles

GB/T 34658, GB/T 27930

AC Charging Interfaces for Electric Vehicles

GB/T 20234.2, GB/T 20234.1

DC Charging Interfaces for Electric Vehicles

GB/T 20234.3, GB/T 20234.1

Construction of Electric Vehicle Charging & Swapping Facilities

NB/T 33004


Email:hello@jjrlab.com


Leave Your Message


Write your message here and send it to us


Related News
Read More >>
Amazon Clothing Storage Units ASTM F2057-23 and DV Amazon Clothing Storage Units ASTM F2057-23 and DV
05 .15.2026
Amazon clothing storage units now require DV Direct Verification per ASTM F2057-23. Tests: stability...
What is the ASTM F2057 Compliance Standard? What is the ASTM F2057 Compliance Standard?
05 .15.2026
ASTM F2057-23 anti-tip furniture standard defines safety for dressers; JJR LAB ISO/IEC 17025 offers ...
US Dresser ASTM F2057-23 Furniture Tip Over Test US Dresser ASTM F2057-23 Furniture Tip Over Test
05 .15.2026
US dresser ASTM F2057-23 tip-over testing by JJR ISO/IEC 17025 LAB: drawer load, stability & ant...
The Latest 2026 Thailand NBTC Compliance Guide The Latest 2026 Thailand NBTC Compliance Guide
05 .15.2026
2026 Thailand NBTC by JJR LAB: RF/EMC/Safety tests for WiFi, BT & 5G devices, CE+Deviation suppo...
CE Certification Directives for Electronic Product CE Certification Directives for Electronic Product
05 .14.2026
EU CE certification directives are mandatory for electronics export. JJR Laboratory provides expert ...
What is CPSC eFiling What is CPSC eFiling
05 .13.2026
CPSC eFiling 2026: JJR LAB offers CPC/GCC testing (ASTM F963/16CFR) for Lead/Phthalates at low cost....
CPSC Products Must Undergo eFiling CPSC Products Must Undergo eFiling
05 .13.2026
JJR LAB provides CPSC eFiling, CPSIA & ASTM F963 testing for toys, electronics and furniture fro...
What is the U.S. CPSC eFiling System? What is the U.S. CPSC eFiling System?
05 .13.2026
The US CPSC eFiling system becomes mandatory in July 2026. Discover the 7 core data elements and com...

Leave Your Message