How to get the EN 55035 Test Report?

For Amazon sellers to get the EN 55035 test report, the process begins with the enterprise confirming the product standards. Next, prepare the user manual, circuit diagram, BOM (Bill of Materials), and mass production prototypes. Then, contact JJR, an ISO/IEC 17025 qualified laboratory, and provide us with the required documents. JJR will conduct the EMC immunity test according to standard requirements. Once the test is passed, the customer will receive the test report. Finally, upload the report to the Amazon Europe marketplace along with the en 55032, DoC, and CE technical files. EN 55035 itself is not a "certificate," but the EU electromagnetic compatibility (EMC) immunity testing standard for multimedia equipment.

What is EN 55035?

EN 55035 is the EU electromagnetic compatibility (EMC) immunity standard for multimedia equipment, used to evaluate "whether the product's operation will be affected by external electromagnetic interference." It is typically used in conjunction with EN 55032 (Electromagnetic Emission / interfering with other devices):

When selling USB devices, chargers, data cables, speakers, cameras, set-top boxes, LED controllers, smart small appliances, etc., on Amazon Europe, sellers are frequently required to provide EN 55032 + EN 55035 emc reports.

Which products require an EN 55035 test report?

It is typically required for:

1.Multimedia Equipment (computer peripherals, monitors, audio/video equipment)

2.IT Equipment (hubs, network cards, hard drive enclosures)

3.Consumer Electronics (cameras, projectors, smart speakers)

4.LED / Smart Home Products with main control boards

5.Certain Power Adapters, Data Cables, and USB Peripherals

6.Products with wireless functions (Bluetooth/WiFi/2.4G/Zigbee):

    6.1In addition to EN 55035, RED 2014/53/EU testing must also be conducted.

    6.2May require the involvement of an NB (Notified Body).

    6.3Simultaneously supplement with LVD, RF, and SAR/MPE (if applicable).

Amazon EN 55035 Testing Process

Confirm Product Standards and Directives

First, determine if the product falls under:

1.EMC Directive 2014/30/EU

2.lvd directive 2014/35/EU (Mains powered products)

3.RED Directive 2014/53/EU (Wireless products)

4.Additional requirements such as RoHS, WEEE, gpsr, EU Representative, etc.Common combination for multimedia equipment: EN 55032 + EN 55035 + EN 62368-1 + DoC.

Prepare Technical Documents

The laboratory typically requires:

1.Product User Manual

2.Specifications

3.Circuit Diagram / PCB Layout

4.BOM (Bill of Materials) for critical components

5.Nameplate Label

6.Outer packaging / User Manual in PDF

7.2–3 mass production representative prototypes Note: Prototypes must be in their final sales state. Firmware, cables, power supplies, and outer housings must not be altered midway.

Choose the Right Laboratory (Crucial)

Prioritize selecting a lab that:

1.Is an ISO/IEC 17025 accredited laboratory (JJR LAB)

2.Has CNAS / ILAC-MRA qualifications

3.Has EMC anechoic chambers and shielded rooms

4.Can issue English reports

Conduct EN 55035 Immunity Testing

Typical test items include:

1.ESD (Electrostatic Discharge) (IEC 61000-4-2)

2.RS (Radiated Radio-Frequency Electromagnetic Field Immunity)

3.EFT (Electrical Fast Transient/Burst)

4.Surge

5.CS (Immunity to Conducted Disturbances)

6.Power Frequency Magnetic Field

7.Voltage Dips and Short InterruptionsAfter testing, the laboratory will provide a PASS / FAIL result along with raw data curves.

get the Formal Report and Rectify (If Failed)

Pass: Issue the formal EN 55035 test report.

Fail: Perform PCB filtering, shielding, add TVS, common-mode chokes, or optimize grounding.

Retesting: After rectification, conduct a differential retest; a full retest of all items is not always necessary.Pre-testing during the design phase is much more cost-effective than rectifying after mass production and being delisted by Amazon.

Assemble CE Technical Files and Upload to Amazon

Amazon requires a complete compliance package, not just "a single piece of EN 55035 paper":

1.en 55032 test Report

2.EN 55035 Test Report

3.Safety Report (e.g., EN 62368-1)

4.rohs report

5.EU Declaration of Conformity (DoC)

6.EU Responsible Person (EU Rep) information

7.Evidence of Label / Nameplate / User Manual

8.Germany WEEE / France EPR (According to national requirements) Upload Path: Seller Central → Compliance Dashboard (Manage Compliance) → Corresponding ASIN → Upload compliance documents.

Lead Time and Cost Reference

Costs are influenced by product complexity, wireless capabilities, multiple models, and whether an English report is required. Please provide your product manual to us, and JJR will issue a formal quotation.

Frequently Asked Questions by Amazon Sellers

Amazon Seller Central asks me to upload EN 55035. Can I write it myself? 

No. It must be issued by a qualified laboratory based on actual sample testing.

What is the relationship between EN 55035 and CE? 

CE is the EU compliance mark; EN 55035 is one of the harmonized standards supporting the CE-EMC declaration.

Do USB data cables need EN 55035?

If it is a passive cable, it may follow different evaluation processes based on the product definition. USB devices with built-in chips, main controllers, or conversion chips usually require EMC evaluation.

What else does the Amazon Germany marketplace require besides EN 55035?

 WEEE, Packaging Act (VerpackG), EU Representative, GPSR, German localization of the manual, and a complete set of CE documents.

Is the report permanently valid? 

There is no fixed expiration date. However, if the product undergoes changes to its circuit, power supply, main controller, housing, or wireless module, it must be re-evaluated.