EMC China Lab

TEMU Temperature Test Report Qualification Upload Guide

Views :
Update time : 2026-03-30

The Temperature Test Report qualification is a safety certification used to prove that electrical products will not experience overheating or abnormal operation during use. You are required to upload actual photos and test reports that meet the corresponding testing standards. The specific requirements are as follows:

 

Requirements for Actual Photos

1. Please upload at least complete actual photos of the product (e.g., six-sided views of the product). The photos must be taken in a real environment, clear and complete, unprocessed by any photo editing software, and free of jagged distortion at the edges.

2. The photos must clearly display all label information of the product in accordance with applicable regulatory requirements (e.g., product name, model, manufacturer, product description, ce mark, etc.). The label information shall be clear, legible and indelible. Printing on white paper followed by transparent tape pasting or repeated pasting is prohibited.

3. The product in the actual photos must be consistent with the product actually sold (the product in the SKU images), including structural design, appearance, label information in the product details, and all content in the product details.

Examples of actual photos are as follows (for reference only):

 TEMU Temperature Test Report Qualification Upload Guide(图1)

Requirements for Test Reports

The test report shall contain complete and clear information, proving that the product has passed all test items required by applicable regulations, including but not limited to the following contents:

1. Basic product information;

2. Basic manufacturer information;

3. Testing standards (e.g., IEC/UL/EN 60335, GB 4706, IEC/UL/EN 60745, IEC/UL/EN 62841, UL 2595, etc.);

4. Specific test items and results (e.g., test items such as Heating and Abnormal operation shall be clearly marked as "Pass");

5. Photos of tested samples;

6. Signature / seal of the testing laboratory and other mandatory contents of the test report.

Examples of test reports are as follows (for reference only):

TEMU Temperature Test Report Qualification Upload Guide(图2)

TEMU Temperature Test Report Qualification Upload Guide(图3)

TEMU Temperature Test Report Qualification Upload Guide(图4)

[The content is for reference only and does not constitute any legal opinion or advice.]


Email:hello@jjrlab.com


Leave Your Message


Write your message here and send it to us


Related News
Read More >>
What is CPSC eFiling What is CPSC eFiling
05 .13.2026
CPSC eFiling 2026: JJR LAB offers CPC/GCC testing (ASTM F963/16CFR) for Lead/Phthalates at low cost....
CPSC Products Must Undergo eFiling CPSC Products Must Undergo eFiling
05 .13.2026
JJR LAB provides CPSC eFiling, CPSIA & ASTM F963 testing for toys, electronics and furniture fro...
What is the U.S. CPSC eFiling System? What is the U.S. CPSC eFiling System?
05 .13.2026
The US CPSC eFiling system becomes mandatory in July 2026. Discover the 7 core data elements and com...
IMPORTANT: Amazon US CPSC Certificates Must Be eFi IMPORTANT: Amazon US CPSC Certificates Must Be eFi
05 .13.2026
Amazon US requires CPSC eFiling from Jul 8, 2026. JJR LAB provides ASTM/CPSIA/CPC testing for toys, ...
ROHS and Weee Compliance ROHS and Weee Compliance
05 .12.2026
RoHS and WEEE directives control hazardous substances and e-waste; JJR LAB offers third-party testin...
Waste of Electrical and Electronic Equipment Weee Waste of Electrical and Electronic Equipment Weee
05 .12.2026
WEEE EU EPR: producers register, fund recycling, label, report across member states. JJR LAB incl fe...
Low Voltage Directive CE Marking Low Voltage Directive CE Marking
05 .12.2026
LVD CE Marking covers EU safety for 50–1000VAC/75–1500VDC products. JJR LAB provides testing & c...
What are CE EMC Testing Requirements What are CE EMC Testing Requirements
05 .12.2026
CE EMC testing ensures EU compliance (EN 55032/55035/61000, RED). JJR LAB offers EMI/EMS, ESD, surge...

Leave Your Message