Electrical and EMC Testing Services

Views :

Update time : 2025-11-10

What is Electromagnetic Compatibility (EMC) Testing?

Electromagnetic compatibility refers to the ability of a device or system to function satisfactorily in its electromagnetic environment without causing unacceptable electromagnetic interference (EMI) to other devices in the environment.

Why is emc testing So Important?

EMC standards are mandatory requirements in most national markets, including Europe, the United States, China, South Korea, Australia, and New Zealand. EMC testing is essential to help you meet regULatory requirements, improve product performance, and REDuce the risk of costly violations. Third-party EMC testing and compliance assessments also help strengthen your competitive edge and market position.

Compliance with electromagnetic compatibility (EMC) regulations is a key issue when marketing products globally. Understanding the various related regulations that affect the entry of products into target markets is the key to success.

By addressing the above issues, we can help clarify relevant regulations, remove entry barriers, and develop an EMC testing plan suitable for our clients' target markets, saving them from repeat testing costs across different markets. We will then carry out appropriate tests based on this plan, allowing our clients to confidently manufacture and market their products worldwide. Engineers will also assist in resolving any EMC-related issues encountered during the testing process to ensure timely product launch.

Service Scope

- Information Technology Equipment

- Telecommunications Equipment

- Home Appliances / Power Tools / Electric Toys

- Electrical Lighting Equipment

- Audio-Visual and Television Broadcast Receivers

- Railway Systems

- Road Traffic Signal Systems

- Mobile Phone Products

- Electrical Installations for Road Vehicles and Ships

- Wireless (RF) / Telecommunications / WiMAX Devices

- Other Electrical Products (e.g., Uninterruptible Power Systems, Medical Equipment, etc.)

Testing Items

- electromagnetic interference testing (emi test)

- Conducted Interference

- Radiated Interference

- Power Harmonics Interference

- Voltage Fluctuation & Flicker Interference

- Disturbance Power

- Click

- Electromagnetic Field Strength Testing (EMF test)

- Electromagnetic Susceptibility Testing (EMS test)

- Electrostatic Discharge Susceptibility (ESD)

- Radiated Susceptibility (RS)

- Electrical Fast Transient Susceptibility (EFT)

- Surge Susceptibility (Surge)

- Conducted Susceptibility (CS)

- Power Frequency Magnetic Field Susceptibility (PMF)

- Voltage Dips Susceptibility (Dip)

- Ring Wave Susceptibility

What are the EMC Testing Standards?

European Union

- General Standards:

- IEC 61000-4-2: Electrostatic Discharge Immunity Test

- IEC 61000-4-3: Radiated Immunity Test

- IEC 61000-4-4: Electrical Fast Transient/Burst Immunity Test

- IEC 61000-4-5: Surge Immunity Test

- IEC 61000-4-6: Conducted Immunity Test

- IEC 61000-4-8: Power Frequency Magnetic Field Immunity Test

- IEC 61000-4-11: Voltage Dips Immunity Test

- Home Appliance Standards:

- CISPR 14-1 / EN IEC 55014-1: Emission Requirements for Household Appliances, Power Tools, etc. (9 kHz - 400 GHz)

- CISPR 14-2 / EN IEC 55014-2: Immunity Requirements for Household Appliances, etc. (0 Hz - 400 GHz)

- EN IEC 61000-3-2: Harmonic Current Limits

- EN IEC 61000-3-3: Voltage Fluctuation and Flicker Limits

- Wireless Equipment Standards:

- EN 300 220-2: Short-Range Devices (≤500 mW) (25 MHz - 1000 MHz)

- EN 300 328: 2.4 GHz ISM Band Spread Spectrum Devices

- EN 300 330: Short-Range and Inductive Loop Devices (9 kHz - 30 MHz)

- EN 301 489-1: EMC Requirements for Radio Equipment (RED Directive Compliance)

United States

- General Standards:

- fcc part 15: Radio Frequency Interference Control for Electronic Products (Subpart B applies to home appliances)

- fcc part 18: EMC Requirements for Industrial/Scientific/Medical Devices

- Wireless Equipment Standards:

- FCC Part 15.247: Emission Testing Requirements for Bluetooth, Wi-Fi, Zigbee, etc.

- FCC Part 15.249: Technical Specifications for Certain Wireless Devices

- FCC Part 15.225: 13.110–14.010 MHz Device Standards

- FCC Part 15.231: Standards for Remote Controls, Security Systems, and Other Instantaneous Transmitting Devices

Testing Process

JJR Laboratory China can perform the relevant electromagnetic compatibility tests according to the following international and regional standards (only major items are listed, for more services please contact our customer service).

Countries and Product Categories:

- Australia

Information Products, Audio-Visual Products, Mobile Devices, Wireless Products, Telecommunications Equipment, Home Appliances, Power Supply Products, Lighting Equipment, Medical Products, Solar Inverters, Digital TV and Broadcast Products

Certification: RCM

- United States

Certification: FCC

- Canada

Certification: IC

- European Union

Certification: CE

- Taiwan

Information Products, Audio-Visual Products, Mobile Devices, Wireless Products, Telecommunications Equipment, Home Appliances, Batteries, Power Supply Products, Lighting Equipment, Medical Products, Digital TV and Broadcast Products

Certification: bsmi

- Japan

Information Products, Audio-Visual Products, Mobile Devices, Wireless Products, Telecommunications Equipment, Home Appliances, Power Supply Products, Lighting Equipment, Medical Products

Certification: VCCI