EU CE Certified EN 55032 Testing Laboratory
en 55032 applies to multimedia equipment with an AC or DC rated voltage of no more than 600V, and multimedia equipment is information technology equipment, audio equipment, video equipment, broadcast receiving equipment, entertainment light control equipment, or a combination of the above equipment. Products previously within the scope of EN 55013 and EN 55022 are also within the scope of EN 55032. Multimedia devices whose main purpose is use are also within this scope.
EU CE certification testing projects include:
Conducted harassment; radiated harassment, electrostatic discharge immunity, radio frequency electromagnetic field radiation immunity, electrical fast transient pulse group immunity, surge (impact) immunity, conductive immunity of radio frequency field induction, power frequency magnetic field Immunity to noise, voltage dips, short interruptions and voltage changes.
The difference between en55032, EN55013 and EN55022:
Cancel the tests of disturbance power and radiated power in EN 55013;
For wide-voltage products, two voltages are generally tested: 230V (±10V) and 110V (±10V), using a frequency of 50Hz or 60Hz;
For displays, PCs need to play a color bar signal with moving elements;
For broadcast receiver tuner ports, it is required to test asymmetric mode conduction.
1. Fill out the application form, provide product pictures and material list, and determine the directives and coordination standards that the product complies with. 3. Determine the detailed requirements that the product should meet. 3. Prepare test samples. 4. Test the product and verify its compliance. 5. Draft and save the technical documents required by the directive. 6. After the test is passed, the report is completed, the project is completed, and the CE certification report is issued. 7. Affix the ce mark and make an EC declaration of conformity. 1. User manual, circuit schematic diagram 2. Circuit block diagram (Block Diagram, also called module function diagram) 3. Circuit layout diagram (PCB LAYOUT), circuit number diagram (PCB placement) 4. Operation description (explanation of block diagram), component list (BOM LIST) 5. 8.label, antenna specifications (or antenna gain diagram) 6. Charger LVD report, fixed frequency software (also called fixed frequency program. Enables the transmitting module to be continuously transmitted at a certain frequency point. Generally, BT and WIFI must provide it)How to obtain EU CE certification ?
Information required to submit the EN55032 test report:
Email:hello@jjrlab.com
Write your message here and send it to us
RoHS Compliance Testing Services
Amazon Toy Seller Exporting to Europe Compliance
US Jewelry Compliance Guide
FCC Certification Requirements and Costs for Consu
EMC Testing Lab IEC 60601 Medical Electrical Safet
What are the FCC Testing Requirements for Bluetoot
Australia RCM Certification for Radio Devices
RED Cybersecurity EN 18031 Standard
Leave us a message
24-hour online customer service at any time to respond, so that you worry!