EMC China Lab

What is Malaysia's SIRIM certification?

Views :
Update time : 2024-07-19

SIRIM is the only guiding certification body in Malaysia. Any factory or company can apply to SIRIM and undergo audits according to recognized standards under the product certification system to obtain recognition. These certifications are voluntary, but in many cases, government regulations may require mandatory certification.

 

There are various types of products in Malaysia that need to comply with the requirements of the IECEE CB system. The MS mark and the ST mark are voluntary and mandatory safety marks, respectively, for products exported to Malaysia.

 What is Malaysias SIRIM certification?(图1)

Scope of Malaysia sirim certification:

Communications equipment and more than 30 other types of products specified in the "Electrical Equipment Approval Regulations" require mandatory type approval and safety certification: plugs (below 15 A), switches and dimmers, sockets, fluorescent lamp holders and starters, ceiling lamp holders, bayonet lamp holders and multiple socket outlets, fluorescent lamps, capacitors for fluorescent lamps, fluorescent lamp ballasts, residual current devices, electric water heaters, hair dryers, desk lamps, liquid heaters, electric irons, electric shavers, kitchen food mixers, immersion heaters, hi-fi devices, mosquito repellents, toasters, electric fans, televisions, vacuum cleaners, players, washing machines, refrigerators, rice cookers, Christmas lights, household power tools, wires, and cables. Other products fall under the category of voluntary certification.

 

Malaysia SIRIM Certification Model:

Type testing + initial factory inspection + audit issuance + post-certification supervision.

 

Malaysia SIRIM Certification Process:

1. Submission of samples and documents;

2. Third-party laboratory testing produces CB/IEC reports;

3. Submission of documents and samples to SIRIM for testing and review;

4. Initial factory inspection;

5. ST audit issuance.

 

Documents Required for SIRIM Certification:

Local representative (company registered locally), certification application form, completed and signed product certification questionnaire, copy of CB certificate, copy of cb test report, technical documents, authorization letter, color photographs, etc.

 

Typical Malaysia SIRIM Certification Timeline: 6-8 weeks.


Email:hello@jjrlab.com


Leave Your Message


Write your message here and send it to us


Related News
Read More >>
FCC ID Certification Compliance Certificate FCC ID Certification Compliance Certificate
04 .30.2025
FCC ID certifies RF products meet U.S. standards for safety and interference. JJR Lab provides testi...
How many types of FCC certifications are there? How many types of FCC certifications are there?
04 .30.2025
FCC certification includes SDoC and FCC ID for electronic and wireless devices. JJR Lab provides tes...
Australia RCM LOGO Certification Australia RCM LOGO Certification
04 .30.2025
RCM certification combines safety & EMC for AU/NZ market access. JJR Lab provides testing to hel...
ANATEL Certification Process in Brazil ANATEL Certification Process in Brazil
04 .30.2025
ANATEL certification is required for telecom products entering Brazil. JJR Lab provides testing to e...
Faucet European Standard EN 817 Testing Faucet European Standard EN 817 Testing
04 .30.2025
JJR Lab provides faucet testing and certification according to European standards EN 817, EN 200, EN...
ISO 17025 Laboratory Test Report ISO 17025 Laboratory Test Report
04 .30.2025
Amazon product removals may occur due to missing ILAC ISO17025 reports or label issues. JJR Lab prov...
Temu Requires UN 38.3 Certification Temu Requires UN 38.3 Certification
04 .30.2025
TEMU requires UN 38.3 certification for battery transport. JJR Testing Laboratory offers professiona...
What is the Amazon ASTM F2057 Test Report? What is the Amazon ASTM F2057 Test Report?
04 .30.2025
The ASTM F2057-23 standard ensures safety for clothing storage units, focusing on stability, flammab...

Leave Your Message