Children's Sleeping Bags CPSC Compliance Testing

As American young families pay increasing attention to infant sleep safety, baby sleeping bags / wearable blankets have gradually become a popular alternative to traditional blankets. According to recommendations from the American Academy of Pediatrics (AAP), infants should not use loose blankets or pillows in their sleep environment to reduce the risk of suffocation and Sudden Infant Death Syndrome (SIDS). As a result, wearable, fixed, and thermostatically controlled children’s sleeping bags have grown in popularity.

In the U.S. market, children’s sleeping bags are mainly sold through baby product brands, e-commerce platforms (such as Amazon, Walmart, Target), and maternal and child chain stores. Since these products directly relate to infant sleep safety and health, the U.S. Consumer Product Safety Commission (CPSC) imposes strict compliance requirements. This article details the CPC certificate test items for children’s sleeping bags and other U.S. compliance requirements.

What is a cpc certificate?

The CPC (Children’s Product Certificate) is a mandatory document required by the U.S. Consumer Product Safety Improvement Act (cpsia). For all products sold in the U.S. market intended for children under 12 years old (including children’s sleeping bags), manufacturers or importers must issue a CPC certificate confirming that the product meets all applicable children’s product safety rules.

Applicable cpc tests for Children’s Sleeping Bags

1. Total Lead Content Test
Total lead content ≤ 100 ppm
All accessible components of children’s products must be tested, including base materials such as metal and plastic.

2. Phthalates
Limit for 8 phthalates ≤ 0.1%
Phthalates are chemicals used in plastics to make them softer and/or more flexible.

3. Small Parts Test
Sleeping bags for children aged 0–3 must undergo small parts testing to avoid choking hazards for children under 3 years old.

4. Small Parts Labeling
If a children’s sleeping bag contains small parts and is intended primarily for children aged 3–6, the product must be labeled “Choking Hazard – Small Parts.” This label warns buyers not to purchase the product for children under 3, who may choke on small parts.

Other U.S. Compliance Requirements

1. PFAS
Multiple U.S. states restrict or ban PFAS in textiles. For example, California’s AB 1817 prohibits PFAS in apparel and textile products.

2. CPAI-75 Flammability Test for Sleeping Bags
CPAI-75 is the widely accepted flammability standard for U.S. sleeping bags (including children’s sleeping bags).
Test Principle:
The fabric sample is fixed on a test frame. Two cotton threads are attached near the ignition end as start and end markers. The igniter flame is positioned approximately 1.9 cm below the sample and applied for 30 seconds, then removed. Timing begins when the flame burns the first thread and stops when the second thread breaks or the flame extinguishes. Burn time and spread distance are recorded.

Both overseas exporters and cross-border e-commerce sellers must ensure children’s sleeping bags comply with CPSIA regulations and include a CPC Certificate to enter the U.S. market. Failure to comply may result in product removal, customs detention, recalls, and fines.