What is the ASTM F2264 Certification Test?

Test Standard:

ASTM F2264-2014 (Reapproved 2019)

Test Item:

Standard Consumer Safety Specification for Non-Powered Scooters

Test Info:

ASTM F2264 is a consumer safety specification standard established in the United States for non-powered scooters (i.e., human-powered scooters), aimed at reducing safety risks during use by children. This standard is applicable to scooters used by children aged 5 years and older, and covers performance requirements, test methods, and labeling requirements.

Standard Scope and Basic Requirements

• Age of Use: The standard explicitly covers products used by children aged 5 years and older. The manufacturer's instructions may specify higher age or weight requirements, but the minimum age of use must not be less than 5 years old.

• Test Environment: Tests must be conducted in an environment with a room temperature of 73±9°F (23±5°C). The product must be pre-conditioned in this environment for at least 1 hour prior to testing.

• Product Assembly: During testing, the product must be completely assembled according to the manufacturer's instructions, unless otherwise specified.

Key Safety Test Items

• Durability Test: Apply the maximum weight (the manufacturer's specified value, or 200 lbs/90 kg if not specified) to the middle of the deck, and drop it 6 times from different heights (front wheel 6 inches off the ground, rear wheel 12 inches off the ground, and 3 more times in reverse). The product must meet the safety requirements before and after the test.

• Folding Mechanism Safety: All folding parts must have a locking mechanism to prevent accidental folding during normal use. After testing, the locking mechanism must be able to maintain a stable position.

• Mechanical Clearance Protection: Clearances between hinges and moving parts must meet anti-pinch design requirements:

• If a 3/16 inch (5 mm) diameter metal rod can be inserted into the hinge line clearance, a 1/2 inch (13 mm) diameter rod must also be able to be inserted, to avoid finger entrapment.

• The clearance between the wheels and components such as the chassis and fenders must also comply with the 13 mm rod test to eliminate shearing or crushing risks.

• Label Durability: Warning labels attached to the product surface must remain firmly in place after testing and cannot easily fall off.

Clauses and Test Requirements

• 16 CFR-1303: Lead in surface coating

• Clause 5: General requirement

• Clause 5.1: Federal regulations specification requirement

• Clause 5.2: Exposed parts

• Clause 5.3: Latching mechanisms

• Clause 5.4: Folding mechanisms, hinges, and clearances

• Clause 5.5: Labeling

• Clause 6: Performance requirements

Lead Time: Regular service 7-9 working days.

Sample Volume: 2 sets of completed products with all the packaging material/instruction. For lead in surface coating, additional samples with enough coating are required.

Remark: This standard is for the scooter used by children ages 5 years and older.

Information Required for Apply Testing: Appropriate age and the weight limit of the user.

ASTM F2264 Test Report Application Process

1. Preliminary Preparation

• Confirm the product model, appearance, and structure remain unchanged.

• Select an ISO17025/CNAS/CPSC accredited laboratory, JJR LAB.

• Determine the test package: F2264 Mechanical Safety + cpsia Lead/Phthalates (mandatory for US customs clearance/platforms).

2. Submit Documents and Send Samples

• Required Documents: Application form, product photos, English instruction manual + warning labels, BOM (Bill of Materials) list, business license.

• Required Samples: 2 sets of completed scooter products (for destructive testing use, will not be returned).

3. Place Order for Testing

• Confirm quotation and lead time → Sign contract and make payment → Send samples to the laboratory.

• Regular Lead Time: 5–10 working days.

• Expedited Lead Time: 3–5 working days.

4. Laboratory Testing and Audit

• Execute a full set of structure, strength, brake, clearance, drop, label, and chemical compliance tests.

• If qualified, issue the report; if unqualified, retest after rectification.

5. get Report and Compliance Finalization

• get the electronic/paper stamped test report, and use the report to issue the CPC (Children's Product Certificate) yourself, which is used for listing, customs clearance, and customs inspection.

Key Points to Note

1. Validity: The report is only valid for the submitted model; structural or material modifications require retesting.

2. Terminology: There is no official ASTM certificate; the term "certification" commonly used in the market refers to the test report.

3. Market Requirements: For the US market, it must be combined with the CPSIA chemical test + cpc certificate to be considered fully compliant.