Security Equipments Testing Lab

Short Description:

JJR specilise in the Security Equipments testing and certification services, we were certified as an IECEE CBTL. Provide EMC, safety, energy efficiency, battery and other projects


Product Details

Product Tags

Defence and Security Equipment

Defence security equipment products are widely applicable, and can be exported worldwide with various electronics equipment. JJR specilise in the testing and certification services, we were certified as an IECEE CBTL. All these ensure our efficiency and accurate testing and certification capability.

 

The common Defence security equipment products are as follows:

monitoring equipment

Monitor

CCTV

NVR

DVS

IP camera

Temperature sensor

Smoke sensor

Intrusion detector

anti-theft equipment

ATA

building intercom

parking management equipment

Access Control System

The lock

Fingerprint lock

Electronic lock

patrol equipment

Walkie talkie

 

Defence and Security products are mostly used outdoors, much more attention is needed for UV radiation test, corrosion and IP protection test. The absence of safety, EMC warning instructions and equipment maintenance instructions is very common for user manuals.

Why Choose Us?

JJR Lab, accredited by CNAS, CMA, CNCA & A2LA, consistently operates competently and generates accurate and valid results in accordance with ISO/IEC 17025. We are also IECEE CB Scheme Test Laboratory (CBTL). Thus, testing reports from JJR Lab can be accepted between countries.

JJR has closely contact with certification agencies and competent agencies around the world to provide customers with one-stop global certification services in more than 100 countries and regions for more than 20 years.

 

Your Benefits At A Glance:

1.20 Years Of Experience

JJR has extensive experience in all types of devices and regulatory requirements across markets. 

2.Provide Free Modification Service Program

Together with our wealth of knowledge in complex regulations globally, JJR provides a complete suite of testing solutions according to your needs including free Modification service.

3.Save time to global markets

With over 7,000 square meters of labs, JJR offers the best testing cycles and you don't have to wait in line, JJR offers 1-on-1 service.With our in-depth insight of global product quality and regulatory requirements, JJR can optimize your costs and minimize your time to market.

4.Complete qualifications

ISO/IEC 17025 lab, accreditated by CNAS, CMA,A2LA,GLP.

5.Competitve price

located in China ,Testing costs are lower than other labs.

 

We're Here for You

We're based in China but regularly work with clients globally. We will get back to you in 1 working day.

 

Our Business Hours: 

8.30am - 5.00pm in CST (UTC/GMT+08:00) Monday - Friday 

 

Email:

hello@jjrlab.com

Looking forward to receiving your email !

JJR Testing and Certification Solutions.

Standards We Test To


Safety

Electromagnetic   compatibility (EMC)

IEC report

IEC 60950-1

IEC 60065

IEC 62368-1:2014

IEC 62368-1:2018

CISPR 32, CISPR 35

IEC 61000-3-2, IEC 61000-3-3

Europe

EN 62368-1:2014+A11/2017

EN IEC 62368-1:2020+A11:2020

EN55032, EN55035, EN55024, EN61000-3-2,    EN61000-3-3

United States

UL 62368-1:2014

UL 62368-1:2019

FCC Part 15B

Canada

CAN/CSA C22.2 No. 62368-1 -14

CSA C22.2 No. 62368-1:19

ICES-003

Japan

J60950-1 (H29)

J60065 ( H26 )

J62368-1 (H30)

J55013 (H22), J55022   (H22), J55032 (H29) ,

Australia

AS / NZS 60950-1

AS / NZS 60065

AS / NZS 62368-1:2018

AS / NZS CISPR 32

China

GB4943.1

GB8898

GB / T 9254, GB 17625.1, GB / T 17625.2,   GB / T 17618, GB / T 13837, GB / T 9383

others

Email   us, for more information 

hello@jjrlab.com

JJR Qualifications

CMA, CNAS (17025), AQSIQ, IEC CBTL, US UL, A2LA, FCC, TIMCO, CEC, DOE, Germany TUV, EMCC, Japan VCCI, Norway DNV, NEMKO, UK ITS, Canada IC, Hong Kong EMSD and other qualifications have been obtained.

Experience in Testing Process

1. The reason the radiation test failed

There are many reasons for EMC radiation tests failed according to the standard, such as interface filtering, cable design, grounding, shielding etc. Generally speaking, it is the problem of PCB design. For TCB, a multilayer board is a recommended choice, as it can reduce impedance. The circuit on the PCB board is required to be straight and short.

 

2. The problems of product information

Label, Schematic, User manual, CDF/BOM, PCB layout

Certification Services We Offer

1. Certification

International CB 

EU CE

Germany GS , TUV 

America UL, ETL, FCC 

Canada  CSA, IC

China CCC

Korea  KC

Japan  PSE

Australia  SAA, RCM

Taiwan BSMI

Singapore CPS,IMDA

Malaysia SIRM

More global certifications email us at hello@jjrlab.com

Testing We Support

 

Testing

Safety test

EMC test

Energy efficiency test

Battery test

ERP, CEC, DOE, NRcan, MPES, CECP,DOE, CEC   test

Photo biological safety of lamps and lamp   systems

We are able to provide debugging   solutions for product improvement.

 

Test items (Safety)

Input Current Test

Label Wiping Test

Energy Level Test

SELV Test

Current-Limiting Circuit Test (LCC)

Power-Limiting Test (LPS)

Ground Continuity Test

Temperature And Humidity Test

Drop

Impact And Other Mechanical Stress Tests 

Ball Pressure Test

Normal Temperature Rise Test

Touch Voltage

Touch Current Test

Withstand Voltage Insulation Test

Abnormal Test

Component Failure Test, etc.

 

Test items (EMC)

Conduction Test

Radiation Test

Harmonics Test

Voltage Fluctuations And Flicker Test

Static Electricity Test

RS Test

EFT Test

Surge Test

CS Test

Power Frequency Magnetic Field Test

Voltage Sag Test, etc.

 

Test Items (Others)

1. For external power supply:

ERP, CEC, DOE, NRcan, MPES, China Energy efficiency

2. For battery charger:

DOE, CEC

 

62471:  Photobiological safety of lamps and lamp systems

62471-5: Photobiological safety of lamps and lamp systems – Image projectors

60825-1: Equipment classification and requirements

Service Procedure

1. Provide us with product pictures, product brochures/manuals

2. Determine your needs(test report purpose/ test itmes/ standards)

3. Receive the testing/compliance service proposal and quotation 

4. Sign contract and make payment

5.Send samples (please contact us for address info.)

6.Informed project opening and test TAT(turn around time) via email

7.Testing 

8.Draft report for your confirmation

9. Formal reports endorsed by ILAC - CNAS (electronic version) 

10.Sample Discard or Return

 


Email:hello@jjrlab.com





Leave Your Message


Write your message here and send it to us

Leave Your Message