How to get an ASTM F2613 Test Report?

ASTM F2613 applies to folding chairs and folding stools with a seat height of 15 inches or less, which may or may not have a rocking base, designed for children who can get in and out of them unassisted. This includes children's chairs without a backrest or armrests, as well as children's chairs and stools that can fold for easy transportation and storage. This policy does not apply to seating without a rigid frame (such as bean bag chairs or foam chairs).

Amazon requires all children's folding and non-folding chairs and stools to be tested and comply with the following regulations, standards, and requirements:

Compliance Options for Children's Folding and Non-Folding Chairs and Stools

One of the following three options:

1.ASTM F2613-21 (Standard Consumer Safety Specification for Children's Chairs and Stools);

2.ASTM F2613-22 (Standard Consumer Safety Specification for Children's Chairs and Stools);

3.16 CFR Part 1232 (Safety Standard for Children's Folding Chairs and Folding Stools);

All of the following items:

1.16 CFR Part 1130 (Requirements for Consumer Registration of Durable Infant or Toddler Products);

2.Consumer Product Safety Improvement Act (cpsia) (Lead and Phthalates);

3.Section 14(a)(5) of the Consumer Product Safety Act (CPSA) (Tracking Labels);

Key Testing Items for ASTM F2613

Structural Safety Testing

1.Static Load: Tested using a 50 lb cylinder for seat height  10 inches; tested using a 100 lb cylinder for seat height > 10 inches.

2.Fatigue Testing: The folding mechanism must undergo a 10,000-cycle opening and closing test to ensure normal locking functionality.

3.Stability Testing: Simulates external forces during use to ensure the product does not tip forward, sideways, or backward.

Protection Against Mechanical Hazards

1.Automatic Locking Device: Must be equipped with an automatic locking device that engages automatically when unfolded to prevent accidental collaPSE.

2.Single-Action Locking: Unlocking force  45 N.

3.Double-Action Locking: Requires an intentional two-step unlocking mechanism.

4.Hinge Clearance: Non-locking models must pass the 12.7 mm (½ inch) clearance test to prevent finger entrapment.

5.200 N Force Folding Test: 5 cycles, locking device must not fail, and no pinch points.

6.Hazardous Edges & Points: Hazardous sharp edges and points are prohibited; wooden components must be smooth and free of burrs.

Chemical Safety Requirements

1.Surface Coating Lead Content:  0.009%.

2.Total Lead Content in Accessible Parts:  100 ppm.

3.Plastic Components: Must comply with phthalate restrictions (DEHP / DBP / BBP)  0.1%.

ASTM F2613 Testing Process for Children's Folding Chairs

1.Fill Out Application Form: Submit a testing application form to the testing laboratory, specifying product information and testing requirements.

2.Send Samples: Mail the children's folding chair and stool samples to be tested to the testing laboratory.

3.Sign Contract: Sign a testing contract with the testing laboratory to confirm testing items, fees, and timeline.

4.Arrange Testing: JJR LAB conducts testing in accordance with the requirements of 16 CFR Part 1232 & ASTM F2613.

5.Issue Test Report: Upon completion of testing, the testing laboratory will issue the test report.

6.Issue CPC Certificate: If the test results show that the children's folding chairs and stools meet the requirements of 16 CFR Part 1232 & ASTM F2613, the testing laboratory assists the manufacturer or importer in issuing the cpc certificate.